Product descriptionPrimer applicator, M-Pro, 130mm Applicator for applying windshield primers and accelerators to both glass and sheet metal surfaces when replacing windshields. Especially good when using primer from a bottle. Can also be used to apply the tube type primer included in the Bondkits if the primer is first squeezed into a separate small container and the applicator then dipped into the container. Features: * Length: 130 mm * Material: superlon/steel Use: 1. Protective equipment Always use adequate protective measures when handling adhesives, such as protective gloves suitable for polyurethane adhesives. Also pay attention to the ventilation of gases released from the adhesive, i.e. possible respiratory protection. 2. Surface preparation Surfaces must be clean, dry and free of grease, oil, dust or impurities. 3. Application Wet the applicator with primer and softly roughen the surfaces according to the manufacturer's instructions. 4. Stain removal Undried primer can be removed from tools and equipment with a suitable solvent. Once dried, the product can only be removed mechanically. Hands and other contaminated skin should be cleaned immediately with soap and water. 5. Drying Drying time is approximately 10-15 minutes, depending on temperature. Shipping Product can be shipped with these shipping methods. Pickup from warehouse in Finland 0,00 € Pick this delivery method when you want to pick up the goods from our warehouse in Nummela, Finland or the window will be installed locally by us. DSV - Noutopiste package 9,00 € Matkahuolto- Lähellä-package 9,00 € Matkahuolto - Jakopaketti (8-16 door to door, weekdays) 19,00 € Posti - Postal package 10,00 € Posti - Freight pallet shipment 59,00 €
