3D Printed mounting system for the Gilbert Engineering Singing Bulbs. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces or for ground installations. Mounts are available for the small 30″ bulbs and the medium 46″ bulbs. Upright or hanging orientations do not matter with these mounts as they fit both styles.* The mounts are sized to fit either 1/2″ PVC pipe or 1/2″ EMT conduit and are designed to be zip tied to the coro. They feature a hole on the top where a screw can be inserted through the mount and into the PVC or EMT to secure it in place. There are two styles available depending on your installation needs, a single mount and a double mount. The double mount was primarily designed for those who are doing ground installations as it will resist twisting and EMT is recommended for this installation. Two pieces of 1/2″ rebar can be inserted into the ground and then slide the EMT over top of the rebar. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only. *There is a small difference (about 4mm) in the vertical placement of the pixels between the upright and hanging versions of the 46″ bulb. The holes in the mounts average out this distance and thus will not be perfectly centered around the pixel opening, but there is still ample clearance around the holes to insert the pixels.
